Posts Tagged ‘materials’
Split rail fences were once constructed by merely stacking logs in a criss-cross manner. Today, a split rail fence, also known as post and rail fences are built using fence posts. A split rail fence is quite easy to build and will help define one’s outdoor living area without concealing it behind wooden fence boards, like with a stockade fence. A split rail fence also helps to keep livestock confined. In this article, we will talk about how you can build a split rail fence.
Before you start building the split rail fence, you need to get the approval of your local utility companies in order to construct a split rail fence. If you damage the underground pipelines or cables, you may deprive your home and your neighbor’s home of water, electricity or other services. You will be financially liable for the repairs. Representatives of the local utility company will come to your house and mark where the underground cables and pipes are located. You should call them a few days before you intend to start digging.
Mark the designated area where you intend to build a fence with the help of stakes and a string. You must ensure that the fence does not stray over your property line. You may be required to hire the services of a surveyor in order to identify and mark your property line.
Determine the number of rails and posts required for the construction of the split rail fence. Measure the length of the string that you made use of to mark your property. Split rails are usually about 10 feet in length, but split rails are also available in other sizes such as 6 feet, 8 feet and even 12 feet in length.
Purchase the tools, materials and supplies necessary to build a split rail fence such as split rails and posts from a lumberyard or a local home improvement store. The fence posts need to be drilled and the rails notched in order to make assembly easier. You can also buy a gate to be installed between two fence posts.
The next step in the split rail fence building process is to dig a hole of approximately 2 feet using an auger for the first post and insert the post into the hole. Once inserted, fill up the hole with dart and press it down as firmly as possible. Insert the rails into the posts and check to see if the rails are straight and level and make any adjustments if required. Repeat the process until the whole fence is constructed.
- split rail fencing
- post and rail fence
- split rail fence
- how to build a split rail fence
- diy split rail
- how to construct old fashion split rail fence
- how to cut post for split rail fence
- Split rail fence posts how to build